Pine to Peaks Loop
Boulder County · 0.99 mi one way · 205 ft of descent as drawn · about 25 min
View mapPlan a tripDownload GPX
One file with the route sketch, numbers, mapped facilities and a checklist, for when you have no signal. It does not include map tiles, conditions or closures.
Overview
Pine to Peaks Loop is mapped as a trail of 0.99 mi in Boulder County. It is not a loop: you walk it one way or out and back.
It runs between 6,945 ft and 7,161 ft above sea level, a difference of 217 ft.
As drawn it is downhill one way: 205 ft of descent. Walked the other way the climb and descent swap.
The mapped surface is dirt.
Mapped along or near the trail: 1 peak.
Estimates
- Computed effort band: easy (from length and climb; not an official difficulty).
- Estimated time 25 min one way by Naismith's rule, which assumes steady walking and adds time for climbing. Real time varies.
Before you rely on this
- No water source is mapped for this trail. That may only mean nobody has mapped one, so carry your own water.
- Check the land manager for closures, seasonal rules and permits before you go; none of that is verified here.
Elevation
Hover, tap, or use the arrow keys on the chart to read a point; it is shown on the map too.
Before you go
- Parking
- 1 parking area mapped near the start (nearest about 0.12 mi away). Fees and limits are not included. mapped by OpenStreetMap contributors
- Trailhead and directions
- Start at 40.04632, -105.34281. Directions to the start ↗
- Permits and fees
- We have no verified permit or fee details. Official pages: Boulder County ↗. not verified
- Dogs
- No dog rule is tagged. not verified
- Water
- No water is mapped. Carry your own. not verified
- Toilets and facilities
- 1 toilet mapped. mapped by OpenStreetMap contributors
- Accessibility, bikes and horses
- No access details are tagged. not verified
- Seasonal rules, closures and hazards
- Not verified here. Check the land manager (Boulder County ↗) and read the hiker condition reports below. No report does not mean the trail is open or safe. not verified
Weather at the trailhead
Today: sunrise 7:13 AM, sunset 6:19 PM (computed from the trailhead location).
Forecast for the trailhead area from the U.S. National Weather Service, updated Oct 17, 12:46 AM. Mountain weather changes fast and can differ a lot by elevation: check the official forecast for your route before you go.
Recent conditions
Reports come from Arête members, not from land managers. They show when something was seen, not whether it is still true. Check official sources before you go.
No condition reports in the last 30 days. Conditions are unknown, not necessarily good.
Reviews
No reviews yet, so there is no rating to show. We never invent ratings. Sign in to be the first to review this trail.
Photos and places from hikers
Added by community members and checked by our team before they appear. Photos have their location data removed. These are not official information.
No approved photos or places yet.
Along the way
Sights
- Peak0.21 mi from start7,139 ftBald Mountain OSM ↗
Trailhead and facilities
Parking and toilets shown are within about 0.25 mi of the trail start.
Points come from OpenStreetMap contributors and can be missing, moved or out of date. How we label data.
Nearby trails
Data, sources and how the numbers are made
| Length | 0.99 micomputed |
|---|---|
| Route type | Not a loopunknown |
| Surface | Dirtfrom source |
| Difficulty | Unknownunknown |
| Elevation gain (as drawn) | 132 ftcomputed |
| Elevation loss (as drawn) | 205 ftcomputed |
| Estimated duration | about 25 min one way as drawn (Naismith's rule)computed |
| Official verification | Not verified by an official sourceunknown |
Length is measured from the route geometry in the source data, so it can differ from signed or official distances. Gain and loss describe the direction the line is drawn; the route view above shows the other direction and out and back. Elevation is computed from USGS 3DEP 1/3 arc-second DEM (public domain), sampled about every 10 m and smoothed.
© OpenStreetMap contributors (ODbL). Overpass API extract: Boulder County, CO (hiking relations + named paths). Licence: ODbL 1.0. Data version osm-2026-10-16, imported 10/17/2026. View the source record · Improve this trail on OpenStreetMap ↗ (free account needed; corrections reach us on the next import)
Frequently asked questions
How long is Pine to Peaks Loop?
Pine to Peaks Loop in Boulder County is 0.99 mi long, measured from its route geometry in OpenStreetMap data. Signed or official distances can differ.
How much elevation does Pine to Peaks Loop gain?
Walking from the start to the end as drawn, it climbs about 132 ft and descends about 205 ft, between 6,945 ft and 7,161 ft. These are computed from the USGS 3DEP elevation model and can differ from other apps; the other direction swaps climbing and descending.
How hard is Pine to Peaks Loop?
Difficulty is unknown: no source we use rates this trail, and we don't guess. Use the length and elevation gain to judge it for yourself.
How long does Pine to Peaks Loop take?
About 25 min one way for a fit hiker, by Naismith's rule from the length and climb. It is an estimate: allow more for rest, photos, heat, altitude and weather.
Where does Pine to Peaks Loop start?
The route starts near 40.0463, -105.3428 (Boulder County). Use the Directions button to open it in your maps app.
Are dogs allowed on Pine to Peaks Loop?
Not tagged in OpenStreetMap, so it is unknown. Check posted signs and the land manager's website.
Is there water, parking or a toilet at Pine to Peaks Loop?
Mapped in OpenStreetMap near this trail: 0 water points, 1 parking area, 1 toilet. Mapped water is not tested or guaranteed: carry your own. Fees and permits are not included here; check the official page.
Trail data can be wrong or out of date, and Arête is not an emergency service. Check official sources, weather and closures before you go.